Technical Review Committee
Clara Dhanemozhi A, Jayaraj Annapackiam College For Women, India
Gowrisankar A, Vellore Institute Of Technology, India
Kumaravel A, K S Rangasamy College Of Technology, India
Muthumari A, Anna University Regional Campus, Madurai, India
Therasa Alphonsa A, Annamalai University, India
Sailaja Abbaraju Krishna, R B V R R Women's College Of Pharmacy, India
Ariffin Abdul Mutalib, Universiti Utara Malaysia, Malaysia
Hamzh Ali Abdullah Alalawneh, Fahad Bin Sultan University, Saudi Arabia
Fazeel Abid, University Of Management And Technology, Pakistan
Ajay Kumar Agarwal, J B Knowledge Park, India
Jitendra Agrawal, Rajiv Gandhi Proudyogiki Vishwavidyalaya, India
Navneet Kumar Agrawal, Maharana Pratap University Of Agriculture And Technology, India
Shantanu Agrawal, Intel Corporation, United States
Ferial Ahmadi, University Of Mazandaran, Iran
Velayudham Aiyappan, Jansons Institute Of Technology, India
Hilda Abiola Emmanuel Akerele, Anchor University Lagos, Nigeria
Hamzh Al Alawneh, F B S U, Saudi Arabia
Mohammed Ali Hussain, K L University, India
Vimal Jerald Alphonse, St. Joseph's College, India
Asha Ambhaikar, Kalinga University, India
Bhavani Anand, Mepco Schlenk Engineering College, India
Kalaivani Anbarasan, Saveetha School Of Engineering, India
Sivasankari Anbazhagan, Sri Shakthi Institute Of Engineering And Technology, India
Suganthi Appalasamy, U M K, Malaysia
Prakash Muthu Arjuna Samy, Annamalai University, India
Suchith Reddy Arukala, Kakatiya Institute Of Technology And Science, India
Vijay Anant Athavale, Walchand Institute Of Technology, India
Bharathi B, Sathyabama Institute Of Science And Technology, India
Hariharan B, S R M Institute Of Science And Technology, India
Kiran Bala B, K Ramakrishnan College Of Engineering, India
Roja Reddy B, R V College Of Engineering, India
Senthilkumar B, Kumaraguru College Of Technology, India
Sumathy B, Sri Sairam Engineering College, India
Surendiran B, N I T Puducherry, India
Jyothi Badnal, C B I T, India
Abhishek Bajpai, Rajkiya Engineering College, India
Jatinder Singh Bal, Sant Baba Bhag Singh University, India
Kolli Balakrishna, G I T A M University, India
Kavitha Balamurugan, Anna University, India
Santhosh Kumar Balan, Guru Nanak Institute Of Technology, India
Thirunavukarasu Balasubramaniam, Queensland University Of Technology, Australia
Sudha Balasubramanian, Saveetha Institute Of Medical And Technical Sciences, India
Balasubramanian Balavilathan, Anna University, India
Parvinder Bangad, Delhi Institute Of Technology And Management, India
Rohit Bansal, Vaish College Of Engineering, India
Arup Barman, Assam University, India
Thangagiri Baskaran, Mepco Schlenk Engineering College, India
Japungsar Basumatary, Central University Of Gujarat, India
Ben Khadda Ben Ammar, Doctor, Algeria
Yaswanth Bhanu Murthy, Vasireddy Venkatadri Institute Of Technology, India
Manish Bhardwaj, K I E T Group Of Institutions, India
Shaveta Bhatia, Manav Rachna International Institute Of Research And Studies, India
Debnath Bhattacharyya, K L University, India
Haider Ali Biswas, Khulna University, Bangladesh
Kamel Bou Hamdan, Beirut Arab University, Lebanon
Abderrazak Boutramine, Ibn Zohr University, Morocco
Abdelbasset Brahim, I M T Atlantique, France
Shyam Burkule, Meta Platforms, Inc., United States
Bala Manikandan C, Mepco Schlenk Engineering College, India
Gangalakshmi C, Mepco Schlenk Engineering College, India
Hemanth C, V I T, India
Marimuthu C N, Nandha Engineering College, India
Sajeev Chacko, University Of Mumbai, India
Amrita Chakrabarti, Shiv Nadar University, India
Rajdeep Chakraborty, Netaji Subhash Engineering College, India
Sundar Ganesh Chappani Sankaran, Karpagam College Of Engineering, India
Deisy Chelliah, Thiagarajar College Of Engineering, India
Venkatesh Chenrayan, Adama Science And Technology University, Ethiopia
Mary Cherian, Kumaraguru College Of Technology, India
Velmurugan Chinnusamy, Kumaraguru College Of Technology, India
Venu Gopal Rao Chowdary, G I T A M University, India
Deepa D, Bannari Amman Institute Of Technology, India
Gowdhaman D, S A S T R A University, India
Lakshmi D, V I T Bhopal University, India
Muruganandam D, Anna University, India
Sheela D, S I M A T S University, India
Sivabalaselvamani D, Kongu Engineering College, India
Susitra D, Sathyabama Institute Of Science And Technology, India
Vijendra Babu D, Aarupadai Veedu Institute Of Technology, India
Sunita Daniel, F O R E School Of Management, India
Aruna Deoskar, Savitribai Phule Pune University, India
Vijaya Deshmukh, M G M University, India
Abhinav Vinod Deshpande, V I T University, India
Priya Deshpande, I I C M R Pune, India
David Wilson Devarajan, Karunya Institute Of Technology & Sciences, India
Anurag Dixit, Sai Info Pvt, India
Ronald Doni, Sathyabama Institute Of Science And Technology, India
Ravishankar Dudhe, Manipal Academy Of Higher Education, United Arab Emirates
Elsie Hall Dunnam, I I C S E University D E, Australia
Bhaskaran E, Government Of Tamil Nadu, India
Prabakaran E, Dr N G P Institute Of Technology, India
Mohamed Eid Shenana, Benah University, Egypt
Alaa El-hazek, Benha University, Egypt
Saikishore Elangovan, A S D F, Thailand
Michael Raj F, Stella Mary's College Of Engineering, India
Zeynab Farhadi, Researcher, Iran
Yousef Farhaoui, Moulay Ismail University, Morocco
Arunkumar G, Sathyabama Institute Of Science And Technology, India
Poornima G, B M S College Of Engineering, India
Radhakrishna G, R V College Of Engineering, India
Ranjani G, Visvesvaraya Institute Of Technology, India
Ravi G, Sona College Of Technology, India
Shobha G, V T U, India
Singaravel G, K S R College Of Engineering, India
Thirunarayanan G, Annamalai University, India
Uma Devi G, University Of Engineering And Management, Jaipur, India
Sathish Kumar G A, Professor, India
Ediric Gadia, Gordon College, Philippines
Ajay B Gadicha, P R Pote College Of Engineering & Management, India
Shalini Gambhir, S R M University, India
Puvaneswari Ganapathiappan, Coimbatore Institute Of Technology, India
Ganesan Ganapathy, Adikavi Nannaya University, India
Subramaniam Ganesan, Oakland University, United States
Achal Garg, N S L, India
Anshul Garg, Taylor's University, Malaysia
Janvee Garg, F O R E School Of Management, India
Reza Gharoie Ahangar, University Of North Texas, United States
Pradip Ghorpade, Vidya Pratishthans Kamalnayan Bajaj Institute Of Engineering And Technology Baramati, India
Sayed Gomaa, Al - Azhar University & The British University In Egypt, Egypt
Rajarajan Gopal, Valluvar College Of Science And Management, India
Kannan Gopal Radhakrishnan, P S N A College Of Engineering And Technology, India
Prakash Gopalakrishnan, Amrita Vishwa Vidyapeetham University, India
Venkatesan Govindan, M R Government Arts College, India
Bhiksha Gugulothu, Bulehora University, Ethiopia
Jose Moses Gummadi, Malla Reddy University, India
Gaurav Gupta, Shoolini University, India
Ruchi Gupta, Shaheed Bhagat Singh College, India
Chidananda H, Rao Bahadur Y Mahabaleswarappa Engineering College, India
Syed Shahul Hameed, University Of Technology And Applied Sciences - S U R Campus, Oman
Ching Hao Lai, I T R I, Taiwan
Dinesh Harkut, S G B A University, India
Pon Harshavardhanan, V I T Bhopal University, India
Deeba Hasan, I I T Madras, India
Eswari Beeram Hemanth Kumar, Mohan Babu University, India
Sreenivasa Rao Ijjada, G I T A M University, India
Carlo Inovero, Polytechnic University Of The Philippines, Philippines
Vijayan Gurumurthy Iyer, Chartered Engineer, India
Frank Vijay J, K C G College Of Technology, India
Jayapriya J, Sathyabama Institute Of Science And Technology, India
Naren J, Alliance University, India
Nithyashri J, S R M Institute Of Science And Technology, India
Sadhik Basha J, National University Of Science & Technology ( International Maritime College Oman ), Oman
Sahaya Ruben J, Anna University, India
Mathana J M, St Peter's Institute Of Higher Education And Research, India
Shyam Mohan J S, Sri Chandrasekharendra Saraswathi Viswa Mahavidyalaya, India
Amjed Lateef Jabbar Ali, University Of Diyala, Iraq
Rupal Jain, N T U Singapore, T U M Germany, United States
Rupal Jain, Network Program Leader, United States
Vipin Jain, Teerthanker Mahaveer University, India
Vijayasekhar Jaliparthi, G I T A M, India
Gnanasekaran Jekka Subramanian, Former Principal And Professor, India
Jayaprakash Jeyaraju, Dr M G R Educational And Research Institute University, India
Refonaa Jeyaston, Sathyabama Institute Of Science And Technology, India
Beaulah Jeyavathanar, S R M Institute Of Science And Technology, India
Barun Kumar Jha, University Of Delhi, India
Mrarun John, P B R Visvodaya Institute Of Technology And Science, India
Deepa Jose, K C G College Of Technology, India
Anbumani K, Sri Sairam Engineering College, India
Anitha Kumari K, P S G College Of Technology, India
Balasubramanian K, The Madurai Diraviyam Thayumanavur Hindu College, India
Dhanalakshmi K, Theivanai Ammal College For Women, India
Gopalasatheeskumar K, Sri Shanmugha College Of Pharmacy, The Tamil Nadu Dr. M. G. R. Medical University, India
Kokula Krishna Hari K, Techno Forum Research And Development Center, India
Malathi K, Saveetha Institute Of Medical And Technical Sciences, India
Nirmala Devi K, Kongu Engineering College, India
Rajeswari K, Thiagarajar College Of Engineering, India
Ramadevi K, Kumaraguru College Of Technology, India
Sivasakthi Balan K, Sairam College Of Engineering, India
Sriram K, Sri Shanmugha College Of Pharmacy, India
Thamizhmaran K, Government College Of Engineering Bodinayakkanur ( Deputed From Annamalai University ), India
Sanal Kumar K P, R V Government College, India
Tamilselvan K S, K P R Institute Of Engineering And Technology, India
Thippareddy K S, R V College Of Engineering, India
Uma K V, Thiagarajar College Of Engineering, India
Shafiul Kadir A K M, University Of Rajshahi, Bangladesh
Vaikuntanath Kakarla, I C A I, United Kingdom
Maran Kaliamoorthy, Sairam Insititute Of Management Studies, India
Lekshmi Kalinathan, Anna University, India
Mohammad Arif Kamal, Aligarh Muslim University, India
Ramadevi Kanagaraj, Kumaraguru College Of Technology, India
Balakrishnan Kandasamy, Karpaga Vinayaga College Of Engineering And Technology, India
Porkumaran Karantharaj, Sri Sairam Engineering College, India
Subha Karthick P, Valluvar College Of Science And Management, India
Subramanian Karthikeyan, University Of Technology And Applied Sciences, Oman
Anbukarasi Karunanithi, Pope John Paul I I College Of Education, India
Ruba Soundar Kathavarayan, Mepco Schlenk Engineering College, India
Parthiban Kathirvel, Sastra Deemed University, India
Rajesh Keshavrao Deshmukh, Kalinga University, India
Shahnawaz Khan, University College Of Bahrain, Bahrain
Ruqaiya Khanam, Sharda University, India
Manju Khari, Jawaharlal Nehru University, India
Monika Khatri, Poornima University, India
Kannan Kilavan Packiam, Bannari Amman Institute Of Technology, India
Tritva Jyothi Kiran, Adikavi Nannaya University, India
Narendra Kohli, H B T U, India
Sreevalsa Kolathayar, National Institute Of Technology Karnataka, India
Bhanu Prakash Kolla, Koneru Lakshmaiah Education Foundation, India
Thangavel Krishnakumar, Paavai Engineering College, India
Prabu Krishnamoorthy, Government Arts And Science College, Kuthalam, Mayiladuthurai, India
Chitra Krishnan, V I T University, India
Nirmalkumar Krishnaswami, Kongu Engineering College, India
Martin Sagayam Kulandairaj, Karunya Institute Of Technology And Sciences, India
Ashok Kumar, Sathyabama University, India
Rajeev Kumar, Moradabad Institute Of Technology, India
Rajiv Kumar, Chandigarh University, India
Sanjeev Kumar, Dr Bhimrao Ambedkar University, India
Sarvesh Kumar, Babu Banarasi Das University, India
Satheesh Kumar G S, Erode Sengunthar Engineering College, India
Vijaya Kumari, The Oxford College Of Engineering, India
Sanjay Kumbhar, Rajarambapu Institute Of Technology, India
Sumit Kushwaha, Chandigarh University, India
Lionel Beneston L, Anna University, India
Renuka L, G I T A M University, India
Rushikesh Gajanan Lavhale, P R M I T & R Badnera, India
Xinghua Li, Wuhan University, China
Nikhil Lilakar Kulkarni, Marathwada Accelerator For Growth And Incubation Council, India
Arun Manicka Raja M, R M K College Of Engineering And Technology, India
Dhavamani M, Kongu Engineering College, India
Govindarajan M, Annamalai University, India
Jawahar M, Mepco Schlenk Engineering College, India
Nalini M, Sri Sairam Engineering College, India
Namratha M, B M S College Of Engineering, India
Natarajan M, Annamalai University, India
Parimita M, S H U A T S, India
Pavithra M, Jansons Institute Of Technology, India
Rajakani M, S R M Institute Of Science And Technology, India
Sowrirajan M, Coimbatore Institute Of Engineering And Technology, India
Sujithra M, Coimbatore Institute Of Technology, India
Suresh M, Kongu Engineering College, India
Umavathi M, B M S College Of Engineering, India
Vinoth Kumar M, R V Institute Of Technology And Management, India
Jeyasheela Rakkini M J, S A S T R A Deemed University, India
Jeyasheela Rakkini M J, Visvesvaraya Technological University, India
Devarajan M M, Thiagarajar College Of Engineering, India
Archana M S, R V College Of Engineering, India
Bhuvaneswari M S, V I T University, Vellore, India
Edmar M. Paguirigan, University Of Northern Philippines, Philippines
Sivanandam Magudeeswaran, K P R Institute Of Engineering And Technology, India
Prashant Mahajan, R C Patel Institute Of Technology, India
Mohammed Mahmoud, Beijing Institute Of Technology, China
Marichelvam Maiappan Kadarkarainadar, Mepco Schlenk Engineering College, India
Sheik Maideen, Skyline University College, United Arab Emirates
Pabitra Maji, Regent Education And Research Fondation Group Of Institutions, India
Deepak Mane, Senior Data Scientist, Australia
Dishek Mankad, Aarav Info Solution Pvt. Ltd., India
Tamilsalvi Mari, Taylor's University, Malaysia
Samuel Pike Mashaba, University Of South Africa, South Africa
Miroslav Mateev, Abu Dhabi School Of Management, United Arab Emirates
Nida Meddouri, Epita Research Laboratory (lre), Le Kremlin-bicêtre, France
Mary Metilda, Sri Ramakrishna Engineering College, India
Venkatesan Meyyappan, Terrain Perfumes And Ouds Private Limited, India
Divya Mirchandani, University Of Texas Medical Branch, United States
Anirban Mitra, Amity University, India
Abdulrazak Mohamed, School Of Planning And Architecture, India
Ahmad Martadha Mohamed, School Of Government College Of Law Government And International Studies University, Malaysia
Ahmed Mohamed, Benha University, Egypt
Mohamad Afendee Mohamed, Universiti Sultan Zainal Abidin, Malaysia
Makhlouf Mohamed Mahmoud Bekhit, Benha University, Egypt
Ahmed Mohammed Kamaruddeen, Skyline University College Sharjah, United Arab Emirates
Yerra Rama Mohan Rao, Paulsons Beauty & Fashion Pvt. Ltd., India
Mohd Zulkifli Mohd Yunus, Universiti Teknologi Malaysia, Malaysia
Brintha Moorthy, Theivanai Ammal College For Women, India
Assem Moussa, Egypt Air, Egypt
Sallehuddin Muhamad, Universiti Teknologi Malaysia, Malaysia
Siva Surya Mulugundam, G I T A M University, India
Easwaramoorthi Muniappan, Nandha Engineering College, India
Murali Muniraj, Sona College Of Technology, India
Sowmya Muniswamy, R V College Of Engineering, India
Thangavel Murugan, V I T Bhopal University, India
Saravanan Muthaiyah, Multimedia University, Malaysia
Chandrasekaran Muthial Chetty, Frontline Science Foundation, India
Sudalai Muthu, Pondicherry University, India
Balaganesh N, V I T University, Vellore, India
Krishnamoorthy N, Kongu Engineering College, India
Malathy N, Mepco Schlenk Engineering College, India
Shivakumar N, Aarupadai Veedu Institute Of Technology, India
Suthanthira Vanitha N, Muthayammal Engineering College, India
Thangapandian N, St. Joseph's Institute Of Technology, India
Vivekanandan N, Central Water And Power Research Station, India
Latha Nachimuthu, Periyar University, India
Muhammad Nadeem, Yibin University, China
Malmurugan Nagarajan, S R M Institute Of Science And Technology, Tiruchirappalli Campus, India
Ramu Nagarajapillai, Annamalai University, India
Deepa Priya Natarajan, Sri Venkateswara College Of Engineering, India
Ganeshkumar Natarajan, G I T A M University, India
Sundararajan Natarajan, Indian Institute Of Technology Madras, India
Malaya Kumar Nath, National Institute Of Technology Puducherry, India
Senthilnathan Nattuthurai, Kongu Engineering College, India
Anand Nayyar, Duy Tan University, Vietnam
Poonam Ojha, Wami Keshvanand Institute Of Technology, India
Fortunes Paul Okoronkwo, Hillcross College, South Africa
Amina Othmani, Centre National En électrochimie Et En Technologies Environnementales, Canada
Muralikrishna P, Chaitanya Bharathi Institute Of Technology, India
Radha P, Mepco Schlenk Engineering College, India
Saravanan P, Sri Sairam Institute Of Technology, India
Senthilvalavan P, Annamalai University, India
Suresh Kumar P, Dr, India
Umasankar P, Mahendra Engineering College, India
Praveen Kumar P K, Sri Venkateswara College Of Engineering, India
Prasad P M K, G V P College Of Engineering For Women, India
Thamilselvi Palanivel, Anna University, India
Sanjay Pande, G M Institute Of Technology, India
Hari Mohan Pandey, Edge Hill University, United Kingdom
Sunil Kumar Pandey, Institute Of Technology & Science, India
Pitchipoo Pandian, P S R Engineering College, India
Vinothkumar Paramasivam, I I T Madras, India
Anbuoli Parthasarathy, Mannar Thirumalai Naicker College, India
Visweswara Rao Pasupuleti, Universiti Malaysia Sabah, Malaysia
Tanuja Patgar, Dr. Ambedkar Institute Of Technology, India
Neha Pattan, Google, United States
Selvan Perumala, Universiti Utara Malaysia, Malaysia
Chitta Venkata Phani Krishna, J N T U H, India
Sourav Poddar, National Institute Of Technology, India
Hemaraju Pollayi, G I T A M University, India
Chinnasamy Ponnusamy, M L R Institute Of Technology, India
Selvakumar Ponnusamy, P S N College Of Engineering And Technology, India
Vijayakumar Ponnusamy, S R M Institute Of Science And Technology, India
Kovvali Prakash, Symbiosis Center For Distance Learning, India
Athilakshmi R, Valluvar College Of Science And Management, India
Chandrasekaran R, Annamalai University, India
Elangovan R, Good Earth Chemicals Pvt Ltd, India
Karpagam R, Easwari Engineering College, India
Palson Kennedy R, P E R I Institute Of Technology, India
Prabha R, Sri Sairam Institute Of Technology, India
Premkumar R, N M S S V N College, India
Sandhiya R, Coimbatore Institute Of Technology, India
Shantha Selva Kumari R, Mepco Schlenk Engineering College, India
Subhashini R, Sathyabama Institute Of Science And Technology, India
Sundareswaran R, Sri Sivasubramaniya Nadar College Of Engineering, India
Uma R, Anna University, India
Uma R, Sri Sairam Engineering College, India
Valarmathi R, Sri Sairam Engineering College, India
Venkata Nadh R, G I T A M University, India
John Mark R. Asio, Gordon College, Philippines
Sudhakar Radhakrishnan, Dr. Mahalingam College Of Engineering And Technology, India
Zahira Rahiman, B S Abdur Rahman Crescent Institute Of Science And Technology, India
Sivakumar Rajagopal, Vellore Institute Of Technology, India
Vani Rajamanickam, S R M Institute Of Science And Technology Ramapuram, India
Kavitha Rajamanii, Jain Deemed To Be University, India
Gnanajeyaraman Rajaram, Saveetha School Of Engineering, India
Alagesan Rajasekaran, Mannar Thirumalai Naicker College, India
Beaulah Rajendran, S R M Institute Of Science And Technology, India
Athilakshmi Ram, Valluvar College Of Science And Management, India
Sripada Rama Sree, Aditya Engineering College, India
Anwar Ilmar Ramadhan, Universitas Muhammadiyah Jakarta, Indonesia
Valmiki Ramakrishna, Tumkur University, India
Balamurali Ramakrishnan, Chennai Institute Of Technology, India
Pradeep Ramani, N V I D I A, United States
Nallusamy Ramasamy, Muthayammal College Of Engineering, India
Manjula Devi Ramsamy, K P R Institute Of Engineering And Technology, India
Virender Ranga, National Institute Of Technology Kurukshetra, India
Shanta Rangaswamy, R V College Of Engineering, India
Mora Veera Madhava Rao, Osmana University, India
Leonard Raphael, University Of Sussex, United Kingdom
Poongodi Ravikumar, Professor, India
Swarna Ravindrababu, Chennai Institute Of Technology, India
Arockia Xavier Annie Rayan, Anna University, India
Mallikarjuna Reddy, G I T A M University, India
Muannif Ridwan, Islamic University Of Indragiri, Indonesia
Dillip Rout, Sandip University, India
Balachandran Ruthrammurthy, Adama Science And Technology University, Ethiopia
Devi Mahalakshmi S, Mepco Schlenk Engineering College, India
Geetha S, V I T University, India
Hari Krishna S, Sri Sairam College Of Engineering, India
Haseena S, Mepco Schlenk Engineering College, India
Jaganathan S, Dr N G P Institute Of Technology, India
Kanimozhi Suguna S, S A S T R A Deemed University, India
Karthiga S, Anna University, India
Kavi Priya S, Mepco Schlenk Engineering College, India
Mary Praveena S, Sri Ramakrishna Institute Of Technology, India
Muthukumar S, K M C H College Of Pharmacy, India
Nagarani S, Sri Ramakrishna Institute Of Technology, India
Palanivel Rajan S, M Kumarasamy College Of Engineering, India
Radhika S, Sathyabama Institute Of Science And Technology, India
Raja S, C S I R National Aerospace Laboratories, India
Rajesh S, Mepco Schlenk Engineering College, India
Rameshbabu S, Global Institute Of Engineering And Technology, India
Ramprakash S, Anna University, India
Sadasivam S, Chartered Engineer, India
Sasikumar S, H I T S, India
Senthilkumar S, E G S Pillay Engineering College, India
Sridhar Raj S, Mepco Schlenk Engineering College, India
Subha S, Sri Sairam Engineering College, India
Suthagar S, Kongu Engineering College, India
Thilaga S, Ishikaa Data Consultancy Services, India
Uma S, B M S College Of Engineering, India
Vijayashanthy S, Kongu Engineering College, India
Vijendra Kumar S K, P E S University, India
Rachana S. Akki, R V College Of Engineering, India
Ali Saberi, Distinguished Researcher In Iranian Researchers Network, Iran
Nagamuthu Sadayappan, S S M Institute Of Engineering And Technology, India
Satish Sajja, V R Siddhartha Engineering College, India
Roselina Sallehuddin, Universiti Teknologi Malaysia, Malaysia
Naresh Kumar Samy, Universiti Malaysia Kelantan, Malaysia
Swagata Sarkar, Sri Sairam Engineering College, India
Saratha Sathasivam, Universiti Sains Malaysia, Malaysia
Gandhimathi Sathishkumar, Valluvar College Of Science And Management, India
Mercy Paul Selvan, Sathyabama Institute Of Science And Technology, India
Ramesh Sengottuvelu, Jerusalem College Of Engineering, India
Sasikala Senthamarai Kannan, Velammal College Of Engineering And Technology, India
Padmavathy Sethuramasamy, Thiagarajar College, Madurai, India
Jany Shabu S L, Sathyabama University, India
Nikhat Fatma Mumtaz Husain Shaikh, University Of Mumbai, India
Jadala Shankarswamy, Sri Konda Laxman Telangana State Horticultural University, India
Jayanthi Shanmugam, Sona College Of Arts And Science, India
Selvi Shanmugam, Anna University, India
Muhammad Zulqarnain Siddiqui, Iqra University, Pakistan
Bikram Pal Singh, Global Group Of Institutes, India
Hardeep Singh, Amritsar Group Of Colleges (autonomous/nba/naac Accredited), India
Amit Singhal, Raj Kumar Goel Institute Of Technology, India
Nisha Soms, Sri Ramakrishna Institute Of Technology, India
Manikandan Sridharan, E G S Pillay Engineering College, India
Rajasekar Srinvasan, Syed Hameedha Arts And Science College, India
Anusuyah Subbarao, Multimedia University, Malaysia
Krishnakumar Subbian, D R D O, India
Karthik Subburathinam, S N S College Of Technology, India
Dhivya Subramaniam, Kandaswami Kandar's College, India
Bala Subramanian, Anna University, India
Balakrishnan Subramanian, Aarupadai Veedu Institute Of Technology, India
Muthukumar Subramanian, K M C H College Of Pharmacy, India
Sridhar Subramaniyan, Easwari Engineering College, India
Prabhu Sukumaran, Sri Venkateswara College Of Engineering, India
Qamar Sultana, Muffakham Jah College Of Engineering And Technology, India
Selvaperumal Sundara, Syed Ammal Engineering College, India
Gopikirshnan Sundaram, V I T University, India
Anilkumar Suthar, Gujarat Technological University, India
Ziaur Rahman Syed, Ministry Of Higher Education, Oman
Deepa Rani T, Kongu Engineering College, India
Haunmantha Reddy T, Rao Bahadur Y Mahabaleswarappa Engineering College, India
Naresh Kumar T, Annamacharya Institute Of Technology & Sciences (autonomous) Rajampet, India
Vinopraba T, National Institute Of Technology Puducherry, India
Padmavathy T V, Anna University, India
Gopal Tadepalli, Anna University, India
Sumanth Tatineni, University Of Chicago Booth School Of Business, United States
Venkata Ramana Teppala, G I T A M University, India
Muthupandian Thangasamy, P S N A College Of Engineering And Technology, India
Senthil Kumar Thangavel, Amrita Vishwa Vidyapeetham Coimbatore Campus, India
Shanmugapriyan Thiagarajan, A S D F International, India
Nathiya Thiyagarajulu, Assistant Professor, India
Haowei Ti, Mcgill University, Hong Kong
Michael 'coach M J' Tolan, World Class Institute, United States
Binumol Tom, R I T Kottayam, India
Ruchi Tuli, Jubail University College, Saudi Arabia
Mahendra Umare, K D K College Of Engineering, India
Logeswari Uthama Puthran, Institut Aminuddin Baki (cawangan Utara), Malaysia
Govindasamy V, Puducherry Technological University, India
Malarvizhi V, Avinashilingam Institute For Home Science And Higher Education For Women, India
Nirmalrani V, Sathyabama Institute Of Science And Technology, India
Santhi V, Anna University, India
Saravanan V, Arunai Engineering College, India
Sasirekha V, Sairam Engineering College, India
Seethalakshmi V, Pondicherry University, India
Shanmugasundaram V, Annamalai University, India
Berlin Grace V M, Karunya Institute Of Technology And Sciences, India
Jagathy Raj V P, Cochin University Of Science And Technology, India
Anitha V R, B M S Institute Of Technology And Management, India
Sivakumar Vaithilingam, R A M C O Institute Of Technology, India
Govindasamy Vaiyapuri, Pondicherry University, India
Febi Varghese, Kerala State Nirmithi Kendra, India
Rajath Vasudevamurthy, B M S College Of Engineering, India
Seethalakshmi Veerakumar, Visvesvaraya Technological University, India
Saravanan Velayudham, A S D F India, India
Muvvala Venkatanarayana, G I T A M University, Hyderabad Campus, India
Jaiganesh Venu, Bharath University, India
Dippi Verma, Christ University, India
Ambavarm Vijaya Bhaskar Reddy, Atria Institute Of Technology, India
Saisha Vinjamuri, B M S College Of Engineering, India
Ravindra W. Gaikwad, Pravara Rural Engineering College, India
Wan Nor Shuhadah Wan Nik, Universiti Sultan Zainal Abidin, Malaysia
Stanley Weerarartna, Lanka Rainwater Harvesting, Sri Lanka
Vijaya Kumar Y, G M Institute Of Technology, India
Neha Yadav, Jawaharlala Nehru University, India
Sachin Yadav, G L Bajaj Institute Of Technology And Management, India
Mohammed Yousif, University Of Garmian, Iraq
Noor Raihani Zainol, Universiti Malaysia Kelantan, Malaysia
Mansoor Zoveidavianpoor, Universiti Teknologi Malaysia, Malaysia
List Last Updated on : July 03 2025 00:00:25. GMT
Selection Process of Editors
The International Transactions on Software Engineering (ITSE) bearing ISSN 1234-1234 (online) is an annual International Journal double peer-reviewed and published in the month of February by ASDF Journals, London, the UK since 2012.
If you have aspirations to become an editor, one of the ways is through a direct invitation from a publisher. This may happen as a result of your expertise in a specific field of science or discipline, in particular when Publishers wish to publish a new journal. Another way to become an editor is to submit a Membership Form that is 100% free and to is evaluated by our panel.
What are the typical criteria for an Editor position?
These would be:
- The candidate should have a minimum of a PhD degree.
- Expertise and experience in the specialist field related to the journal.
- Publication record of several articles and /or books (usually in / related to the specialist field).
- Being a reviewer for an international peer-reviewed journal.
- Enthusiasm to undertake the Editor role, but ensuring recognition of all aspects of the reality of the role and the work involved
What is the main role and responsibility of a journal Editor?
The key role of a journal editor is to promote scholarship in the specialist field associated with the journal, whilst also promoting the journal as the best journal to publish in. For any journal, the editor will need to encourage new and established authors to submit articles and set up a reliable panel of expert reviewers. Editors are also responsible for offering feedback to reviewers when required and ensuring that any feedback to authors is constructive.
In terms of responsibilities:
- An editor should endeavour to be a leader in the specific field of practice underpinning journal content as it helps the journal development, presence, and standing within the international community.
- An editor should also familiarize themselves with the Committee on Publication Ethics (COPE) ‘Code of Conduct and Best Practice Guidelines for Journal Editors. This has a large resource on the topic of ethical conduct of journal editors, authors, and reviewers.
- Depending on how the journal is managed and how it is structured, an Editor may have to make all the decisions regarding which articles to accept or reject for publication. However many journals will have Associate Editors, Assistant Editors, or Section Editors to help them with making those important decisions. For example, any decision involving unethical practice will often involve the publisher or their representative alongside the Editor and a Section Editor who has discovered the issue.
- As an editor, you will have three or four groups of people to contact regularly: a) the publisher, b) the authors c) the reviewers and d) in some journals direct contact with the production team who manage the publication side of the journal. This latter group will work with the editor to agree on which articles to place in each edition, ensure that the Editor does not use more than the agreed number of pages per issue (especially if paper-based ), and send editor information concerning all articles in their various stages of the editorial process. The Production team member dedicated to that Editor may also be responsible for communicating with authors and reviewers directly.
What is an Editorial Board?
An Editorial Board is primarily made up of a team of individuals that work directly with the Editor to develop the journal and promote new initiatives. Members of the Board may also take responsibility for key activities linked to the journal, for example, the Book review editor or Section Editor (such as the Section Editor for Systematic Reviews ). The Editorial Board normally appoints a Chairperson, who could be one of the board members or could also be the Publisher. When there are meetings, either face-to-face, teleconferences, or Skype, the Chairperson would manage the agenda and the meeting of the Editorial Board. Editorial Board members are chosen for their expertise in key areas related to the journal or chosen for their international presence in the field. There are instances where excellent long-standing reviewers can also be asked to join the Editorial Board. They are normally also from the same expert field as the journal topic. Depending on the roles and responsibilities set by the publisher, the Editor typically reports directly to the Editorial Board. A journal’s Editorial Board normally undergoes a complete renewal after a set period determined by the Editor and Publisher (three years is an average time). This will involve removing some individuals, inviting others, and renewing some existing members for another term. It is important when inviting a Board member that this issue of the term of office is included in the invitation letter to avoid any misunderstandings that can arise.
Ethics topics to consider when publishing:
The publication of an article in a double-blind, peer-reviewed journal is an essential building block in the development of a coherent and respected network of knowledge. It is a direct reflection of the quality of work of the author and the institutions that support them, peer-reviewed articles support and embody the scientific method. It is therefore important to agree upon standards of expected ethical behaviour. Ethics topics to consider when publishing:
- Authorship of the Paper (s): Authorship should be limited to those who have made a significant contribution to the conception, design, execution, or interpretation of the reported study.
- Originality and Plagiarism: The authors should ensure that they have written entirely original works, and if the authors have used the work and/or words of others that this has been appropriately cited or quoted.
- Data Access and Retention: Authors may be asked to provide the raw data in connection with a paper for editorial review, and should be prepared to provide public access to such data.
- Multiple, Redundant, or Concurrent Publication: An author should not, in general, publish manuscripts describing essentially the same research in more than one journal or primary publication. Journals do not view the following uses of a work as prior publication: publication in the form of an abstract; publication as an academic thesis; publication as an electronic preprint. Information on prior publication is included within each publication and its journal Guide for Authors.
- Acknowledgement of Sources: Proper acknowledgement.
- Disclosure and Conflicts of Interest: All submissions must include disclosure of all relationships that could be viewed as presenting a potential conflict of interest.
- Fundamental Errors in Published Works: When an author discovers a significant error or inaccuracy in his/her published work, the author must promptly notify the journal editor or publisher and cooperate with the editor to retract or correct the paper.
- Reporting Standards: Authors of reports of original research should present an accurate account of the work performed as well as an objective discussion of its significance.
- Hazards and Human or Animal Subjects: Statements of compliance are required if the work involves chemicals, procedures, or equipment that have any unusual hazards inherent in their use, or if it involves the use of animal or human subjects.
- Use of Patient Images or Case Details: Studies on patients or volunteers require ethics committee approval and informed consent, which should be documented in the paper.
Open access is an ongoing publication practise that differs in the way traditional methods of publishing papers to the public get submitted, reviewed, authenticated, and finally published. In the Open Access publication model, neither readers nor a reader’s institution is charged for access to articles or other resources. Users are free to read, download, copy, distribute, print, search, or link to the full texts of these articles (see archive) for any non-commercial purpose without requiring a subscription to the journal in which these articles are published. Journal ethics are based on Committee on Publication Ethics (COPE)
Journal follows the Open Access Model. The publication cost should be covered by the author’s institution or research funds. These Open Access charges replace subscription charges and allow the journal to make the valuable published materials freely accessible to all interested online visitors, especially the researchers and young scholars from developing countries.
Journal takes its duties of guardianship over all stages of publishing extremely seriously and we recognize our ethical and other responsibilities. Journal committed to ensuring that advertising, reprint, or other commercial revenue has no impact or influence on editorial decisions. In addition, Editorial Board will assist in communications with other journals and/or publishers where this is useful to editors.
Duties of Editors
- Fair play and editorial independence: Editors evaluate submitted manuscripts exclusively based on their academic merit (importance, originality, study’s validity, clarity) and its relevance to the journal’s scope, without regard to the authors’ race, gender, sexual orientation, ethnic origin, citizenship, religious belief, political philosophy or institutional affiliation. Decisions to edit and publish are not determined by the policies of governments or any other agencies outside of the journal itself. The Editor-in-Chief has full authority over the entire editorial content of the journal and the timing of publication of that content.
- Confidentiality: Editors and editorial staff will not disclose any information about a submitted manuscript to anyone other than the corresponding author, reviewers, potential reviewers, other editorial advisers, and the publisher, as appropriate.
- Disclosure and conflicts of interest: Editors and editorial board members will not use unpublished information disclosed in a submitted manuscript for their research purposes without the authors’ explicit written consent. Privileged information or ideas obtained by editors as a result of handling the manuscript will be kept confidential and not used for their advantage. Editors will recuse themselves from considering manuscripts in which they have conflicts of interest resulting from competitive, collaborative, or other relationships/connections with any of the authors, companies, or institutions connected to the papers; instead, they will ask another member of the editorial board to handle the manuscript.
- Publication decisions: The editors ensure that all submitted manuscripts being considered for publication undergo peer review by at least two reviewers who are experts in the field. The Editor-in-Chief is responsible for deciding which of the manuscripts submitted to the journal will be published, based on the validation of the work in question, its importance to researchers and readers, the reviewers’ comments, and such legal requirements as are currently in force regarding libel, copyright infringement and plagiarism. The Editor-in-Chief may confer with other editors or reviewers in making this decision.
- Involvement and cooperation in investigations: Editors (in conjunction with the publisher and/or society) will take responsive measures when ethical concerns are raised about a submitted manuscript or published paper. Every reported act of unethical publishing behaviour will be looked into, even if it is discovered years after publication. ASDF editors follow the COPE Flowcharts when dealing with cases of suspected misconduct. If on the investigation, the ethical concern is well-founded, a correction, retraction, expression of concern, or other note as may be relevant, will be published in the journal.
Duties of Reviewers
- Contribution to editorial decisions: Peer review assists editors in making editorial decisions and, through editorial communications with authors, may assist authors in improving their manuscripts. peer review is an essential component of formal scholarly communication and lies at the heart of the scientific endeavour. ASDF shares the view of many that all scholars who wish to contribute to the scientific process must do a fair share of reviewing.
- Promptness: Any invited referee who feels unqualified to review the research reported in a manuscript or knows that its prompt review will be impossible should immediately notify the editors and decline the invitation to review so that alternative reviewers can be contacted.
- Confidentiality: Any manuscripts received for review are confidential documents and must be treated as such; they must not be shown to or discussed with others except if authorized by the Editor-in-Chief (who would only do so under exceptional and specific circumstances). This applies also to invited reviewers who decline the review invitation.
- Standards of objectivity: Reviews should be conducted objectively and observations formulated clearly with supporting arguments so that authors can use them for improving the manuscript. Personal criticism of the authors is inappropriate.
- Acknowledgement of Sources: Reviewers should identify relevant published work that has not been cited by the authors. Any statement that is an observation, derivation, or argument that has been reported in previous publications should be accompanied by the relevant citation. A reviewer should also notify the editors of any substantial similarity or overlap between the manuscript under consideration and any other manuscript (published or unpublished) of which they have personal knowledge.
- Disclosure and conflicts of interest: Any invited referee who has conflicts of interest resulting from competitive, collaborative, or other relationships or connections with any of the authors, companies, or institutions connected to the manuscript and the work described therein should immediately notify the editors to declare their conflicts of interest and decline the invitation to review so that alternative reviewers can be contacted. Unpublished material disclosed in a submitted manuscript must not be used in a reviewer’s research without the express written consent of the authors. Privileged information or ideas obtained through peer review must be kept confidential and not used for the reviewer’s advantage. This applies also to invited reviewers who decline the review invitation.
Duties of Authors
- Reporting standards: Authors of original research should present an accurate account of the work performed and the results, followed by an objective discussion of the significance of the work. The manuscript should contain sufficient detail and references to permit others to replicate the work. Review articles should be accurate, objective, and comprehensive, while editorial ‘opinion’ or perspective pieces should be identified as such. Fraudulent or knowingly inaccurate statements constitute unethical behaviour and are unacceptable.
- Data access and retention: Authors may be asked to provide the raw data of their study together with the manuscript for editorial review and should be prepared to make the data publicly available if practicable. In any event, authors should ensure accessibility of such data to other competent professionals for at least 10 years after publication (preferably via an institutional or subject-based data repository or other data centre), provided that the confidentiality of the participants can be protected and legal rights concerning proprietary data do not preclude their release.
- Originality and plagiarism: Authors should ensure that they have written and submit only entirely original works, and if they have used the work and/or words of others, that this has been appropriately cited. Publications that have been influential in determining the nature of the work reported in the manuscript should also be cited. Plagiarism takes many forms, from “passing off” another’s paper as the author’s own, to copying or paraphrasing substantial parts of another’s paper (without attribution), to claiming results from research conducted by others. Plagiarism in all its forms constitutes unethical publishing behaviour and is unacceptable.
- Multiple, duplicate, redundant, or concurrent submission/publication: Papers describing essentially the same research should not be published in more than one journal or primary publication. Hence, authors should not submit for consideration a manuscript that has already been published in another journal. Submission of a manuscript concurrently to more than one journal is unethical publishing behaviour and unacceptable. The publication of some kinds of articles (such as clinical guidelines, translations) in more than one journal is sometimes justifiable, provided that certain conditions are met. The authors and editors of the journals concerned must agree to the secondary publication, which must reflect the same data and interpretation of the primary document. The primary reference must be cited in the secondary publication.
- Authorship of the manuscript: Only persons who meet these authorship criteria should be listed as authors in the manuscript as they must be able to take public responsibility for the content: (i) made significant contributions to the conception, design, execution, data acquisition, or analysis/interpretation of the study; and (ii) drafted the manuscript or revised it critically for important intellectual content; and (iii) have seen and approved the final version of the paper and agreed to its submission for publication. All persons who made substantial contributions to the work reported in the manuscript (such as technical help, writing and editing assistance, general support) but who do not meet the criteria for authorship must not be listed as an author, but should be acknowledged in the “Acknowledgements” section after their written permission to be named as been obtained. The corresponding author should ensure that all appropriate coauthors (according to the above definition) and no inappropriate co-authors are included in the author list and verify that all co-authors have seen and approved the final version of the manuscript and agreed to its submission for publication.
- Disclosure and conflicts of interest: Authors should (1) at the earliest stage possible (generally by submitting a disclosure form at the time of submission and including a statement in the manuscript). (2) disclose any conflicts of interest that might be construed to influence the results or their interpretation in the manuscript. Examples of potential conflicts of interest that should be disclosed include financial ones such as honoraria, educational grants or other funding, participation in speakers’ bureaus, membership, employment, consultancies, stock ownership, or other equity interest, and paid expert testimony or patent-licensing arrangements, as well as non-financial ones such as personal or professional relationships, affiliations, knowledge or beliefs in the subject matter or materials discussed in the manuscript. All sources of financial support for the work should be disclosed (including the grant number or other reference number if any).
- Acknowledgement of Sources: Authors should ensure that they have properly acknowledged the work of others, and should also cite publications that have been influential in determining the nature of the reported work. Information obtained privately (from the conversation, correspondence, or discussion with third parties) must not be used or reported without explicit, written permission from the source. Authors should not use information obtained in the course of providing confidential services, such as refereeing manuscripts or grant applications unless they have obtained the explicit written permission of the author(s) of the work involved in these services.
- Hazards and human or animal subjects: If the work involves chemicals, procedures, or equipment that have any unusual hazards inherent in their use, the authors must identify these in the manuscript. If the work involves the use of animals or human participants, the authors should ensure that all procedures were performed in compliance with relevant laws and institutional guidelines and that the appropriate institutional committee(s) has approved them; the manuscript should contain a statement to this effect. Authors should also include a statement in the manuscript that informed consent was obtained for experimentation with human participants. The privacy rights of human participants must always be observed.
- Peer review: Authors are obliged to participate in the peer-review process and cooperate fully by responding promptly to editors’ requests for raw data, clarifications, and proof of ethics approval, patient consents, and copyright permissions. In the case of a first decision of “revisions necessary”, authors should respond to the reviewers’ comments systematically, point by point, and on time, revising and re-submitting their manuscript to the journal by the deadline given.
- Fundamental errors in published works: When authors discover significant errors or inaccuracies in their published work, they must promptly notify the journal’s editors or publisher and cooperate with them to either correct the paper in the form of an erratum or to retract the paper. If the editors or publisher learns from a third party that a published work contains a significant error or inaccuracy, then the authors must promptly correct or retract the paper or provide evidence to the journal editors of the correctness of the paper. For guidelines on retracting or correcting articles, please see article withdrawal policies.
Duties of the Publisher
- Handling of unethical publishing behaviour: In cases of alleged or proven scientific misconduct, fraudulent publication, or plagiarism, the publisher, in close collaboration with the editors, will take all appropriate measures to clarify the situation and to amend the article in question. This includes the prompt publication of an erratum, clarification, or, in the most severe case, the retraction of the affected work. The publisher, together with the editors, shall take reasonable steps to identify and prevent the publication of papers where research misconduct has occurred, and under no circumstances encourage such misconduct or knowingly allow such misconduct to take place.
- Access to journal content: The publisher is committed to the permanent availability and preservation of scholarly research and ensures accessibility by partnering with organizations and maintaining our digital archive.